This site is for the discussion of Survival, Preparedness, Preppers, Survival Food, Survival Kits, SHTF, Survivalist, Homesteading, and more
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our FREE community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, >>> CLICK HERE>> to join our community <<< today!
If you have any problems with the registration process or your account login, please contact contact us.
Note: If you are having trouble finding the login or Sign up link it is in the Top Right corner in the Gray bar
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The Dyna-Glo pro heater can be powered by a variety of fuels too, such as Kerosene, JP8/Jet A Fuel (Cool!), #1 & #2 Fuel Oil, and #1 and #2 Diesel.
WHAT IF THE AMERICA YOU KNEW, WAS ABOUT TO CHANGE?
The best thing you can do to support the site is pass it on to your friends and fav sites like other forums, facebook, twitter etc. Let people know about us! :)
Diesel, those things really put out some heat... Back in my younger days I worked for an outfit that 'dyed wood shavings'. We would dip them in the dye, dump them in a bin and when the bins got full enough, we took them to the drying rooms.
The drying rooms had three long raised rows with window screen (metal) mesh. We would spread out the wet shavings on top of these rows. Under each row was one of these forced air heaters, and it really got the job done by drying them in a few hours. Nice in winter but a B%*#H in the summer;)
These things make empty spaces warm. Have also been around these on new construction in commercial buildings. It may not warm a 10,000 sq. ft building but a couple take the edge off if it is really frigid outside. Would work really well for a house if you could circulate the warm air throughout. Would want a CO2 monitor as well;)
I use one to heat my shop with and to pre warm my 1977 diesel farm tractor in the winter. ( like yesterday - 30 with wind chill ) The only problem is that style of heater needs 110 to run the blower and fuel pump and with no electricity no heat. But multi fuel is great becuase when SHTF you can scroung from many places. Like my old diesel farm tractor made in Romania becuase it will run on diesel , home heating oil, kerosene and bio fuel.
this one may be a bit more unqiue than the ones you are used to?
It works on the principals ofr a jet engine and vaporizes any fuel you in it, it puts out a turbine/jet type heat wave...
But maybe that's what all of the portable tube heaters like that do?
WHAT IF THE AMERICA YOU KNEW, WAS ABOUT TO CHANGE?
The best thing you can do to support the site is pass it on to your friends and fav sites like other forums, facebook, twitter etc. Let people know about us! :)
Depending on the blower motor amperage you could size this up to the proper inverter/battery bank/ solar panels and have a pretty cool hybrid system...
Would need a nameplate rating on the electric motor to calculate :D
73
later,
ZA
Someday someone may kill you with your own gun, but they should have to
beat you to death with it because it is empty.
The faster you finish the fight, the less shot you will get.
Tweet
Comment