Of all the blades I loved before (ZA's working blades)

[Rustyshakelford]

I don't think that you will find a new one for less than 60. The longer blade gives more power in the swing and better leverage. For the difference in price I would get the longer blade. Don't think you will regret it. Knivesplus.com has them for $67

Not the same, but similiar.

http://www.osograndeknives.com/Ontario/ontario_-_spec_plus_-_spax.htm

[Rustyshakelford]

I don't think that you will find a new one for less than 60. The longer blade gives more power in the swing and better leverage. For the difference in price I would get the longer blade. Don't think you will regret it. Knivesplus.com has them for $67

$57.99 with the sheath

http://www.natchezss.com/brand.cfm?contentID=productDetail&brand=PS&category=0&prodID=PSW14512&CFID=13559389&CFTOKEN=67102385

[beebopcop]

Now where can I find one for $35???

I went onto the Woodsman's website. I looked on ebay too. These critters are not cheap.

Anyone got the cheapest source for these things?

Too, the model with the handguard, it comes in a long and short version. Any suggestions as to what size you have. I am leaning toward the shorter version, it doesn't give up that much in my mind, but still produces the same effect.

Regards,
Greenhouse Hacker

I don't think that you will find a new one for less than 60. The longer blade gives more power in the swing and better leverage. For the difference in price I would get the longer blade. Don't think you will regret it. Knivesplus.com has them for $67

[Zombie Axe]

All Woodman's Pals are made in the USA ( I prefer MOST things that way however I do like Norincos, fireworks and waxwood staffs from China).

Like any thing I buy, I do TONS of research on it. When I was locating a source for one, I was suprised to find it at my local knife wholesaler for $35 :eek:vs. the $60-70 online.

He only carrys the wood handle (no handguard) with a basic nylon sheath with a sharpening stone. I did a group buy on it a long time ago and bought all he had for that price. Last time I looked he had a few and I think they went up to $40 or $45 a pop...

[Big_Saw]

Now where can I find one for $35???

I went onto the Woodsman's website. I looked on ebay too. These critters are not cheap.

Anyone got the cheapest source for these things?

Too, the model with the handguard, it comes in a long and short version. Any suggestions as to what size you have. I am leaning toward the shorter version, it doesn't give up that much in my mind, but still produces the same effect.

Regards,
Greenhouse Hacker

Honestly, nowadays if you found one for less than $60-100, you'd better look and see if there's a "made iin China" label on it somewhere...

You definately get what you pay for these days, and I think we've all noticed the influx of garbage into what used to be a reasonably reputable industry. In fact, I'll be the first to admit: I've been suckered more than once by cheap imitations I thught were genuine bargains.

My $0.02

'Saw

[greenhouse]

Now where can I find one for $35???

I went onto the Woodsman's website. I looked on ebay too. These critters are not cheap.

Anyone got the cheapest source for these things?

Too, the model with the handguard, it comes in a long and short version. Any suggestions as to what size you have. I am leaning toward the shorter version, it doesn't give up that much in my mind, but still produces the same effect.

Regards,
Greenhouse Hacker

[beebopcop]

I started reading the first post. Thanks for a great discussion.
After reading Zombie' post I had a question regarding the Woodsman's Pal.

I read down to Bebopcop's post. He responded to the question I had. I have seen a couple of those Pals with the hand guard, and wondered if anyone out there actually used one.

A Woodsman's Pal is now on the list.

thanks guys
greenhouse

I'm on my second one with the handguard and it works great! You can't go wrong with this blade.

[Zombie Axe]

I started reading the first post. Thanks for a great discussion.
After reading Zombie' post I had a question regarding the Woodsman's Pal.

I read down to Bebopcop's post. He responded to the question I had. I have seen a couple of those Pals with the hand guard, and wondered if anyone out there actually used one.

A Woodsman's Pal is now on the list.

thanks guys
greenhouse

Glad we could help :)
I have not tried the one with the handguard but would think one of those would be nice!

[Big_Saw]

You forgot the 200x optics and the compass.

(your first photo did not upload.)

I got the cracker-jack compass, but the friggin telescope top-mounted needed no explanation....

[Rustyshakelford]

I don't know if I caught everything, but here's my assessment....lol

You forgot the 200x optics and the compass.

(your first photo did not upload.)

[Big_Saw]

I don't know if I caught everything, but here's my assessment....lol

[Rustyshakelford]

LMFAO...ROF............I want one soooooo bad......... :D :D :D :D

I personally like the hood ornament off the Packard(possibly an old Rolls). Gives this rifle a certain je'nais ce qua.

[Big_Saw]

I have got to pick this thing apart....lol

[Big_Saw]

The same place where you can get one of these. Crazy Al's Weapon Emporium!!

LMFAO...ROF............I want one soooooo bad......... :D :D :D :D

[Rustyshakelford]

I just wanna know one thing......


Where in the hell do I get one of THESE?

The same place where you can get one of these. Crazy Al's Weapon Emporium!!