Announcement

Collapse
No announcement yet.

Flat bending jig

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jmk
    replied
    ive got a set of plans as well for a jig, and i made a hydraulic press too, that was really easy. for the press, get a 12 foot 2X6 and cut it into 2foot lengths, make a square frame with the horizontals doubled up, so the verticle lengths are sandwiched. then get an old bottle jack from a full sized truck, (f150, bronco, etc) clamp the jack to the top and away you go. worked for me.

    Leave a comment:


  • Death_Hand
    replied
    Is it just tomuch trouble to build the AKs from scratch

    Leave a comment:


  • jetskrtal
    replied
    I built my first 4 AK's this way.It was a good learning experience,but the next few builds I did,I bought 100% receivers.

    Leave a comment:


  • tre2000zx2
    started a topic Flat bending jig

    Flat bending jig

    Wound up with an AK bending jig for flats. Anyone bend their own on here?
Working...
X